ANTENNA/CABLE SYSTEM CONNECTIONS

(3)Connect one end of the COAXIAL CABLE (supplied) to the ANT.OUT jack of the VCR.

(4)Connect the other end of the COAXIAL CABLE (supplied) to the antenna/cable jack of your TV.

See Combo Antenna Diagram.

CATV COAXIAL CABLE

(1)Disconnect the CATV coaxial cable from the back of your TV set.

(2)Reconnect the CATV coaxial cable to ANT.IN terminal of the VCR.

(3)Connect one end of the COAXIAL CABLE (supplied) to the ANT.OUT jack of the VCR.

(4)Connect the other end of the COAXIAL CABLE (supplied) to the antenna/cable jack of your TV.

See CATV Connection Diagram.

Note to CATV system installer

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

SEPARATE VHF (75-OHM) / UHF (300-OHM) ANTENNA

(1)Disconnect the VHF coaxial antenna cable and the UHF flat twin-lead antenna cable from the back of your TV set.

(2)Reconnect those cables to a UHF/VHF combiner (not supplied).

(3)Connect end of the UHF/VHF combiner to the ANT.IN terminal of the VCR.

15