CONTROLLING VCR INPUT & OUTPUT

If your cable service supplies you with a cable converter box, you can use the basic connection shown below

See Cable Converter Diagram.

NOTES:

 With this connection, you CANNOT record one program and while viewing another.  Channel memory programming is NOT needed when using this connection.

CONTROLLING VCR INPUT & OUTPUT

VIDEO OUTPUT CHANNEL SETTING (BACK OF VCR)

When the VCR is in the Playback mode, or when the VCR/TV button is in the VCR position, you TV will receive the signals from the VCR on either channel 3 or 4. Set the 3CH/4CH selector switch to the station that is not used for normal broadcasts in your area; then set your TV to that same channel when viewing from the VCR.

The video output channel of this unit is set to channel 3 prior to shipment from the

factory.

INPUT SELECT

To use the external input jack, select the AUX position. Press CHANNEL "" or "" button or enter "00" with number button so that "AUX" appears on the screen.

VIDEO MODE SELECTION ON TV

TV power must be on. Please see your TV's owner's manual for details.

20