CHANNEL SET UP AGAIN
CHANNEL SET UP AGAIN
Remember: If your cable box or satellite box is connected as in Fig 4 on page 11 or Fig 5 on page 12, you DO NOT have to set up the channels. Just select the TV and VCR to channel 3 or 4 and also have the CH3/CH4 switch on the back of the VCR to match the channel you selected (CH 3 or CH 4). Now select the Box to the channel you wish to view or record.
• Use the remote control for this procedure.
1 ) Press the MENU button until the INITIALIZE menu appears.
2)Confirm "CHANNEL SET UP" is pointed to, then press the F.FWD/
button.
3)Confirm "AUTO TUNING" is pointed to, then press the F.FWD/
button. After scanning, the tuner stops at the lowest memorized channel.
• The VCR distinguishes between standard TV channels and cable channels.
34