TRACKING ADJUSTMENT

TRACKING ADJUSTMENT

·Tracking adjustment will be set automatically (Digital Tracking function) when you start playback.

However when playing pre-recorded tapes or tapes recorded on units other than your own, noise lines (black and white streaks) may appear on the playback picture. If this occurs, you can adjust the tracking control manually by pressing the CHANNEL or button on the VCR until the streaks disappear.

To return to the DTR function, stop the tape once and start playback again.

·You can reduce the noise lines by pressing the CHANNEL(CH) or button in slow mode, too. Slow tracking adjustment will not be set automatically.

NOTE: In Still mode, press the SLOW button and press the CHANNEL(CH) or button until the streaks disappear. To return to Still mode, press the PAUSE button on the remote control again.

41