HINTS FOR TIMER RECORDING
HINTS FOR TIMER RECORDING
·If there is a power failure or the VCR is unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.
·If the tape runs out before the end time, the VCR will switch to the Stop mode immediately,
eject the tape and the VCR power will be turned off. The "
" indicator will flash.
·If a tape is not inserted or the 
" indicator flashes and timer recording cannot occur. Please inset a recordable tape.
·The TV that is connected to your VCR may be turned ON or OFF when the VCR is in the
CORRECTING AN AUTOMATIC TIMER PROGRAM
1)Turn the power on.
2)Repeat steps [1] to [3] on page 24.
3)Go to the digit you want to change by using the F.FWD/
button or REW/
button.
4)Enter correct numbers by using the PLAY/
or STOP/
button.
5)Press the RESET/EXIT button to return to original mode.
6)Press the POWER button to return to timer
STOPPING A STARTED AUTOMATIC TIMER PROGRAM
Press the STOP/EJECT button on the VCR.
NOTE: The STOP button on the remote control will not function in Automatic Timer Recording mode.
CANCELING OR CHECKING THE START/END TIME
1)Turn the power on.
2)Press the MENU button.
3)Select a program number you want to check by using the PLAY/
or STOP/
button. The details of selected program appears on the TV screen.
You may cancel the entire program by pressing the REW/
button. 4) Press the RESET/EXIT button to return to original mode.
60