MAINTENANCE

WARNING:

Use only original manufacturer’s replacement parts, accessories and attachments. Failure to do so can cause possible injury, poor performance and may void your warranty.

You may make adjustments and repairs described here. For other repairs, have the trimmer serviced by an authorised servicing dealer.

SPOOL REPLACEMENT

EZ LINE™ TAP ADVANCE SYSTEM

NEW PRE-WOUND SPOOL

See Figures 14 and 15.

If replacing string only, refer to “String Replacement” later in this manual.

Use only 2.0 mm (0.080 in) diameter monofilament string. Use the manufacturer’s replacement string for best performance.

1.Stop the engine and disconnect the sparking plug wire. Hold the string head and unscrew the spool retainer. Turn anticlockwise.

2.Remove the empty spool from the string head. Keep the spring attached to the spool.

3.To install the new spool, make sure the two strings are captured in the slots opposite each other on the new spool. Make sure the ends of each string is extended approximately 152 mm (6 in) beyond each slot.

4.Thread the strings into the eyelets in the string head. Carefully push the spool into the string head (gently pull the strings to the outside if necessary). When the spool is positioned in the string head, grasp the strings and pull sharply to release them from the slots in the spool.

5.Push down and turn the spool anticlockwise until it no longer turns. Hold the spool down and rotate clockwise a small amount. Release the spool. The spool should be locked down in the string head. If not, hold down and rotate until locked.

6.Make sure the string head and the spool retainer are installed on the drive shaft by turning the retainer clockwise to tighten.

7.Pull the strings again to rotate the spool into cutting position. Push the spool retainer down while pulling on string(s) to manually advance the string and to check for proper assembly of the string head.

SPOOL

RETAINER

Fig. 14

SPRING

SLOTS

EYELETS

STRING HEAD

DRIVE SHAFT

Fig. 15

13

Page 12 Page 14
Page 13
Image 13
Homelite UT70123, F2035 Maintenance, Spool Replacement EZ Line TAP Advance System, NEW PRE-WOUND Spool, See Figures 14
Page 12 Page 14

UT70123, F2035 specifications

The Homelite UT70123 F2035 is a powerful and versatile electric chainsaw designed for both DIY enthusiasts and professionals. Known for its efficiency and user-friendly design, this chainsaw offers a range of features that make it an essential tool for various cutting tasks, from tree trimming to firewood preparation.

One of the standout features of the UT70123 F2035 is its robust 14-amp motor. This powerful motor delivers excellent cutting performance, allowing users to tackle a variety of projects with ease. The chainsaw is designed for swift cuts, making it suitable for both small branches and larger logs. The high power ensures that users can complete their tasks quickly without the hassle of downtime.

Another significant characteristic is the tool-less chain tensioning system, which simplifies the process of adjusting the chain. Users can easily tighten or replace the chain without the need for additional tools, making maintenance straightforward and user-friendly. This feature significantly reduces time spent on setup and ensures optimal chain performance during use.

The Homelite UT70123 F2035 is equipped with a 16-inch cutting bar, providing an excellent reach for various cutting applications. This length strikes a balance between maneuverability and cutting capacity, making it suitable for a range of tasks, from light trimming to heavier pruning jobs. The built-in safety features, including an electric brake and low kickback chain, enhance user safety by minimizing the risk of accidents during operation.

In terms of design, the chainsaw is ergonomically built with a comfortable grip handle, reducing fatigue during extended use. It also features a lightweight design, further contributing to user comfort. The chainsaw includes a transparent oil tank, allowing users to monitor oil levels for optimal chain lubrication.

Lastly, the UT70123 F2035 operates quietly compared to gas-powered alternatives, making it ideal for residential areas. This electric chainsaw not only delivers efficient performance but also helps to create a less disruptive cutting experience.

In summary, the Homelite UT70123 F2035 combines a powerful motor, tool-less chain adjustment, safety features, and ergonomic design. Whether for light gardening tasks or more intensive woodcutting projects, this chainsaw provides reliability and efficiency for all your cutting needs.
Top Page Image Contents