BEFORE OPERATION
16
Cutting Height
Bagging/Side-Discharge: Move all
four adjustment levers to the
same position.
Mulching: Move the front adjustment
levers one position higher than the
rear levers.
To adjust cutting height, pull each
adjustment lever toward the wheel,
and move it into another notch.
If you are not sure what cutting height
to select, start with a high setting and
check the appearance of the lawn
after mowing a small area. Then
readjust cutting height if necessary.
ADJUSTMENT LEVERS
ADJUSTMENT LEVER
HRB216 TXA HXA.book Page 16 Monday, March 26, 2001 1:06 PM