SB2040
Snowblower Assembly and Installation
Assembly and Installation
Proper installation of the SB2040 includes installing four (4) 26
-
lb.
counterweights. These counterweights are not included with the
snowblower and must be purchased separately.
1. Remove the lag bolts holding the blower head and the pulley
2.
Remove the blower head and pulley assembly from the pallet.
assembly to the shipping pallet.
3.
Remove the loose parts
box,
then inventory the contents.
Inventory Loose
Parts
WORM SUPPORT BRACKET L
-
SHAPED BRACKETS
(2)
ANTIFRICTION RING
COUNTERWEIGHT
B
RACKET
SUBFRAME
ASSEMBLY
LIFT PLATE
(2)
DISCHARGE CHUTE
HOLD
-
DOWN
BRACKET
WORM GEAR
DISCHARGE
GU
A
RD
HANDLE
PUSH FRAME HANDLE SUPPORT
These brackets (and associated hardware) are loosely installed on
the subframe of units with serial numbers from
1000001
-
1000500.
POP
52152
(9610)
5