System Programming

Wireless Network Menu

Changing PAN ID or RF Channel

When the PAN ID or the RF channel is changed, using the Parameters menu option within the Wireless Network menu, the system needs confirmation at more than one option, as described below:

To change the PAN ID:

Select Parameters from the Wireless Network menu

Scroll down (using the arrows) to hightlight option 3, PAN ID

Press Enter to select

Change the PAN ID values, as desired and press Enter

The next screen requests either confirmation or cancellation. Press Enter to confirm (If Esc is pressed, no changes will be made and the screen returns to the main Wireless Network menu)

The system displays the RF channel screen; press Enter to proceed (or to record changed values)

The next screen requests confirmation or cancellation. Press Enter to confirm. If Esc is pressed at this point, the changes to the

PAN ID will not be made.

Parameters

1.7B7177EFACE0049

2.WC Version

3.PAN ID

PAN ID

VAL : FF07

MAX : FFFF

MIN : 0001

PAN ID

Enter to confirm Esc to cancel

RF channel

VAL : 011

MAX : 255

MIN : 001

RF Channel Enter to confirm Esc to cancel

Note: Whenever changes are made to the PAN ID or the RF channel, the network must rebuild itself. Losing the network (entire network in Fault mode) during this process is normal and should only last approximately 10 minutes.

M-510324

301C User Manual

79

7/10

Honeywell

 

Page 81
Image 81
Honeywell 301c user manual Changing PAN ID or RF Channel, PAN ID will not be made