!We recommend use of Honeywell peripherals, power cables, and power adapters compiled with L.P.S. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.

Step 3: Boot the Terminal

If the terminal is not connected to an external power source, it begins booting once you push the Power button. If the terminal is connected to an external power source (e.g., power cable, HomeBase), it will automatically reboot. Do NOT press any keys or interrupt the boot process.

When the boot process is complete, the Home screen appears, and the terminal is ready for use.

Guidelines for Battery Pack Use and Disposal

The following are general guidelines for the safe use and disposal of batteries:

•Do not disassemble or open crush, bend or deform, puncture or shred.

•Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, explosion or other hazard.

•Improper battery use may result in a fire, explosion or other hazard.

•We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may pose a personal hazard to the user.

•Only use the battery for the system for which it is specified. Do not use a battery in any other manner outside its intended use in Dolphin terminals and peripherals.

•Ensure all components are dry prior to mating batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty.

•Replace defective batteries immediately; using a defective battery could damage the Dolphin terminal.

•Never throw a used battery in the trash. Promptly dispose of used batteries in accordance with local regulations.

•Do not short-circuit a battery or throw it into a fire; it can explode and cause severe personal injury. Do not allow metallic conductive objects to contact battery terminals.

•Don’t use a battery in any other manner outside its intended use in Dolphin terminals and peripherals.

•Excessive discharge damages a battery. Recharge the battery when your terminal indicates low battery power.

•If you observe that the Honeywell battery supplied is physically damaged in some way, send it to Honeywell International Inc. or an authorized service center for inspection, see Technical Assistance on page 7

5