Honeywell 6500 Resetting the Device, Step 2: Charge the Batteries, Step 3: Boot the Terminal, Blue, Reset, Power, Reset, Power, Reset

Step 2: Charge the Batteries

Dolphin terminals ship with both the main battery pack and internal backup battery significantly discharged of power. Charge the main battery pack with the Dolphin charging cable for a minimum of 5 1/2 hours before initial use.

1

2

3

!of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.We recommend use of Honeywell peripherals, power cables, and power adapters. Use

Step 3: Boot the Terminal

The terminal begins booting as soon as power is applied and runs by itself. Do NOT press any keys or interrupt the boot process.

When the boot process is complete, the Desktop appears and the terminal is ready for use.

Resetting the Device

Soft Reset:	Using the stylus, press the Reset button. The screen
	turns white and the decode/scan LED flashes blue for
	approximately 10 seconds.
Hard Reset:	28-key: Press and hold the Power button and then
	using the stylus, press the Reset button.
	52-key: Press and hold the Blue and Z (Power)
	buttons and then using the stylus, press the Reset
	button. The screen turns white and the decode/scan
	LED flashes blue for approximately 18 seconds.

5