INSTALLATION
CABLE INSTALLATION (SECONDARY HONEYWELL SCANNER)
11.Scan the following bar code to configure the auxiliary port on the 7820 to accept a Honeywell scanner as the secondary scanner.
The following bar codes do not apply when using an MS6720 as a secondary scanner. If the secondary scanner is not a Honeywell scanner, refer to the Auxiliary Port Control section of the MetroSelect Configuration Guide.
Aux Port Defaults
³9 9 9 9 7 7
The auxiliary input port’s data format must match the main output format of the secondary scanner.
12.Scan the following bar codes, in order, to configure the secondary scanner to match the auxiliary port’s data format.
1st | 2nd |
Enable AUX Output | Secondary Scanner Data |
| Format |
³ 1 2 4 8 1 7 | ³ 4 3 7 5 2 0 |
3rd | 4th (Optional) |
Enable Comm Timeouts | Turn OFF Secondary |
| Scanner’s Beeper |
³ 1 1 8 4 1 2 | ³ 3 1 8 5 0 5 |
13.Turn on the host system.