MAINTENANCE

CABLE REMOVAL

Turn the host power off and disconnect the power supply from the cable before attempting to disconnect the cable from the unit.

Remove the scanner’s back plate from the rear side of the unit. Apply pressure to the points shown in Figure 41 until the back plate unlatches from the scanner.

Figure 41. Cable Cover Removal

For AUX and EAS cable removal:

Pinch connector and gently remove cable from the unit.

For HOST cable removal:

1.Locate the small pinhole on the unit near the cable connection point.

2.Bend a paperclip into the shape shown in Figure 42.

3.Insert the paperclip into the pinhole and apply pressure to release the connector lock.

4.Pull gently on the strain-relief to remove the cable from the unit.

Figure 42. Host Cable Removal

40