Honeywell 8600 Remove Trigger, Replace Trigger

Step 1 - Remove the ring strap module. Turn the trigger until a black screw is visible. Remove the screw.

Step 3 - Lift the trigger up.

Step 2 - Turn the trigger 180°.

Step 3 - Insert and tighten the black screw.

Step 4 - Replace the ring strap module.

Step 1 - Lower the

trigger into the ring strap module as

shown.

Step 2 - Turn the trigger 180°.

Contents

8600 Ring Scanner Quick Start Guide Laser Scanner Laser Imager Trigger Rotation Connect Scanner to Arm Mount Sled Attach Ring to Finger How to Scan a Bar Code Wrist Position When Scanning Remove Ring Strap Module Replace Ring Strap Module Remove Trigger Replace Trigger Technical Assistance User Documentation Limited Warranty Patents Disclaimer