Honeywell AP-010BT, AP-100BT Managing Connections, Linking a 4820 Scanner, Auto Reconnect Mode

Linking a 4820 Scanner

5.Remove the 4820 Linking bar code from the Access Point kit and attach it to the Access Point. Scan the 4820 Linking bar code to establish a connection between the Access Point and the 4820 scanner. The scanner emits a short beep and flashes the green LED to confirm a connection with the Access Point. The Access Point’s Page button remains blue.

If you have difficulty connecting with your 4820, it may be due to Code XML software in your scanner. Scan the following bar code, then scan the 4820 Linking bar code. These steps may resolve this connection problem.

Code XML Off

Managing Connections

Auto Reconnect Mode

By default, the Access Point is set to Auto Reconnect On, so the scanner begins the relink process immediately, when a connection to the Access Point is lost. If you do not want to relink automatically, scan the Auto Reconnect Off bar code.

* Auto Reconnect On

Auto Reconnect Off