17 69-1532—2

Clear a Program Period

NOTE: Wake cannot be cleared.
❑Press , , or for the program period you want to clear.
❑Press until the desired day displays.
❑Press and hold , , or for approximately three seconds until time and temperature clear.
❑Repeat the above steps for each period to be cleared.
❑Press .
STEP 11. OPERATING YOUR THERMOSTAT

Change Temperature Setting Until the Next Program Period (Temporary Change)

❑Press or until the screen shows the desired temperature setting.
NOTE: The temporary temperature setting is displayed for about three seconds and then the room temperature is
displayed. Temporary appears in the display. The setting cancels when the next program period starts or
when you press .

Change Temperature Setting Indefinitely (Hold)

❑Move the System switch to the desired position (Heat or Cool).
❑Press then or to change your setting if desired. (The display changes from showing the setpoint
temperature to room temperature after approximately three seconds.)
❑To cancel “Hold” press .
Leave Return Sleep
Day
Leave Return Sleep
Run
Program
Run
Program
Hold Temp
Run
Program