RCWL200A and RCWL210A
9 69-2112EFS—07
Troubleshooting
Two ‘beep’ sounds are heard and LED flashes twice after the normal chime sound…
Thisindicatesalowbatteryinthechime.Install newbatteries,typeLR14Csizealkalinebatteries.
Three ‘beep’ sounds are heard and LED flashes three times after the normal chime
sound…
Thisindicatesalowbatteryinthebellpush thatactivatedthechime.Installanewbattery,type
CR2032.
When the bell push is operated, the red confidence light does not turn on, or is only on
for a short time…
Lowbattery.Installanewbattery,typeCR2032.
The chime does not work…
•Checkthat thebatteriesarethecorrecttype.
Onlyusealkalinebatteriesforchime.
•Checkthat thebatteriesarefittedcorrectly(nowrongpolarity).
•Checkthat batteriesarenotloose.
•Thechime couldbeoutofrangeofthe bellpush.Trythechimeinadifferentlocation.
•Thechime mightnothavelearnedtheidentityof thebellpush.Followtheprogramming
procedureinstep3.
Note:Donotpressprogrambuttonformorethan15seconds, thiswilldeleteallthememory!
Repeatprogrammingprocedureinstep3torestoreoperation.
69-2112EFS_D.indd 9 12/10/2009 12:05:45 PM