– 42 –
Trouble Conditions
"Check" and
"Battery" Displays
The word CHECK on the keypad's display, accompanied by a
"beeping" at the keypad, indicates a trouble c ondition in the system.
To silence the beeping for these conditions, press any key.
1. A display of "CHECK" and one or more zone numbers
indicates that a problem exists with the displayed zone(s) and
requires your attention. Determine if the zone(s) d isplayed are
intact and make them so if they are not. If th e problem has been
corrected, the display can be cleared if you enter the OFF
sequence (security code plus OFF k ey) twice. If the display
persists, CALL FOR SERVICE .
Note: A display of CHECK 70 on Alpha Display keypads
indicates that the wiring connection to the external sounder is
at fault (opened or shorted), and you should CALL FOR
SERVICE. See “BELL FAILURE” on next page. A display of
CHECK 90 indicates that RF interference may be impeding the
operation of wireless sensors* in the system. See “Rcvr Jam”
on next page.
2. If there are wireless se nsors* in your system, the CHECK
condition may also be caused by some change in the
environment that prevents the wirel ess receiver from receiving
messages from a particular sensor. CALL FOR SERVICE if this
occurs.
* Not all systems use wir eless sensors.
IF YOU CANNOT CORRECT A "CHECK" DISPLAY,
CALL FOR SERVICE.
TYPICAL "CHECK" DISPLAYS
06
CHECK
AC
FIXED-WORD DISPLAY KEYPAD
CHECK 06
BEDROOM WINDOW
ALPHA DISP LAY KEYP AD