INSTALLATION INSTRUCTIONS

Put Bar Code Here
95-7520—02
Excel 10W7753A Unit Ventilator Controller

PRODUCT DESCRIPTION

The W7753A Unit Ventilator Controller is a Free Topology
Transceiver (FTT) LONMARK® Compliant Unit Vent controller
in the Excel 10 family product line.
This controller can be used to monitor/control HVAC
equipment, lighting, and other miscellaneous loads in a
distributed network. The controller is field-mounted to the
equipment that it controls, and the controller wiring is attached
to the screw terminals located on the controller (see Fig. 1).
The W7753A Controller communicates via the 78 kilobaud
Echelon® LonWorks® E-Bus Network.
Allowable input/output connections consist of wall module
points plus two additional resistive sensor inputs, two voltage/
current inputs, four digital inputs and eight digital Triac
outputs.
For the W7753A, any hardware driven by the Triac outputs
must have a minimum current draw, when energized, of
25 mA and a maximum current draw of 500 mA.
Fig. 1. Excel 10 W7753A Unit Ventilator Controller.
M12688
123456789
10 11 12 13 14 15 J3
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
E
GND
LED
BYPASS
SNSR
GND
SET PT
AI-1
OHM
GND
A1-2
OHM
AI-3
V/mA
GND
AI-4
V/mA
22VDC
OUT
E-BUS
E-BUS
JACK
DI-4 GND DI-3 DI-2 GND DI-1 24
VAC
24
VAC
COM
1
OUT
2
OUT
3
OUT
4
OUT
5
OUT
6
OUT
7
OUT
8
OUT