Honeywell Xenon 1500 No Read, Save, * Off, Centering On, Centering On, * Centering Off, Top of Centering Window, Left of Centering Window, Right of Centering Window

Scan Centering On, then scan one of the following bar codes to change the top, bottom, left, or right of the centering window. Then scan the percent you want to shift the centering window using digits on the inside back cover of this manual. Scan Save. Default Centering = 40% for Top and Left, 60% for Bot-

tom and Right.

Centering On

* Centering OffTop of Centering WindowBottom of Centering WindowLeft of Centering WindowRight of Centering WindowNo Read

With No Read turned On, the scanner notifies you if a code cannot be read. If using an EZConfig-Scanning Tool Scan Data Window (see page 8-3), an “NR” appears when a code cannot be read. If No Read is turned Off, the “NR” will not appear. Default = Off.

On

* Off

If you want a different notation than “NR,” for example, “Error,” or “Bad Code,” you can edit the output message (see Data Formatting beginning on page 5-1). The hex code for the No Read symbol is 9C.

3 - 14