Hotpoint HDA850G warranty Questions?, ~. Use This Problem Solver, Possible Cause And Remedy

-
m=
	Questions?
	~. Use This Problem Solver
	PROBLEM	POSSIBLE CAUSE AND REMEDY
	DISHWASHER	A fuse in your home maybe blown, or the circuit breaker tripped. Replace fuse or
	WON’T RUN	reset circuit breaker. Remove any other appliances from the circuit.
	UNUSUAL NOISE	Utensils may not be secure on rack pins. Or something small may have dropped from
		the rack. Water is causing utensils to rattle. Make sure everything is securely placed
		in dishwasher.
	DISHES DON’T DRY	Make sure inlet water temperature is correct. (Seepage 6.)
		Unload the bottom rack first. Water from dishes in the top rack maybe spilling into the
		bottom rack.
		Check for improper loading. Dishes shouldn’t nest together. Avoid overloading.
	UNCLEAN DISHES	Check inlet water temperature. It should be at least 120°F. (To test, seepage 6.)
	AND FLATWARE	To obtain the benefits of a complete cycle, be careful that you do not turn the dial any
		further than n~essary to start the dishwasher.
		Water pressure may be temporarily low. firn on a faucet. Is water coming out slower
		than usual? If so, wait until pressure is normal before using your dishwasher.
		Plugged air gap. (See page 11,)
		Improper rack loading. (See pages 8 and 9.)
	BLACK OR GWY	Aluminum deposits ofien leave marks when they rub against other things. Remove
	MARKS ON DISHES	marks with a mild abrasive cleanser.
	DETERGENT LEFT	Water may not be reaching the detergent cups. Move dishes that maybe blocking
	IN DISPENSER CUPS	detergent cup.
		The dispenser cover may not be opening or may be blocked by improperly loaded
		items. If you used a powder detergent, open the cup and remove any caked-on
		detergent. If the cup still doesn’t open automatically, call for service.
		Detergent may be old. If the powder detergent is hard or caked in the box, throw it away.
		The detergent may not be working well. Try another brand.

12