Hotpoint HDA850G warranty Cycle selection hints, What happem in each cycle, For PLATE WARMER cycle

●For PLATE WARMER cycle:

a.Load clean plates and dishes to be warmed.

b.Select DRYING HEAT–ON drying option.

c.bave the door unlatched.

d. Slowly turn Cycle Indicator Dial clockwise to PLATE WARMER position.

e. Latch the door to start the cycle.

Cycle selection hints

It is important to follow the loading instructions on pages 8 and 9.

P~S & PANS—For items such as pots, pans, cookware, dishes and glasses with heavy soil. Everyday dishes may be included.

NORMAL WASH—For most loads of everyday dishes, glasses and cookware with medium soils.

LIGHT WASH—For dishes that have been pre-rinsedbefore loading. Also, for washing ve~ lightly soiled dishes with soils that have not dried on.

RINSE HOLD—For rinsing partial loads which will be washed later. Select DRYING HEAT– OFF drying option. Do not use detergent.

PLATE WARMER—For warming clean dishes and serving plates for the serving of hot food.

What happem in each cycle

			Minimum
			Wash
			Cycle Time
			(approx.
			minutes)	Cycle Sequence
POTS & PANS	12.6	55*
NORMAL WASH	10.7	55*
LIGHT WASH	9.2	55*
RINSE HOLD	3.6	10

*DRYING HEAT—ON: Add 30minutes.

●You’ll hear occasional clicking sounds:

–Soft food disposer shredding action.

—Drain valve opening to pump water out.

—Timer control as cycle progresses.

—Detergent cup opening.

●During the drying period: —The motor stops.

—Water vapor is released through the vent under the door handle. It maybe visible.

5