HP 100 COLOR CE866ABGJ Adjust the lightness or darkness for copies, Define custom copy settings

Models: 100 CE866ARBGJ

1 220
Download 220 pages 58.76 Kb
Page 129
Image 129
Adjust the lightness or darkness for copies

4.Dry the glass and white plastic with a chamois or a cellulose sponge to prevent spotting.

5.Plug in the product, and then use the power switch to turn on the product.

Adjust the lightness or darkness for copies

1.Load the document onto the scanner glass or into the document feeder.

2.On the control panel, press the Lighter/Darker Define custom copy settings button.

3.Use the arrow buttons to adjust the setting.

4.Press the Black or Color button to start copying.

Define custom copy settings

When you change the copy settings at the control panel, the custom settings remain in effect for approximately 2 minutes after the job completes, and then the product returns to the default settings. To immediately return to the defaults, press the Cancel Print or copy edge-to-edge button.

Print or copy edge-to-edge

The product cannot print fully edge-to-edge. The maximum printing area is 203.2 x 347 mm (8 x 13.7 in), leaving a 4 mm (1/6 in) unprintable border around the page.

Considerations for printing or scanning documents with cropped edges:

When the original is smaller than the output size, move the original 4 mm (1/6 in) away from the corner indicated by the icon on the scanner. Recopy or scan in this position.

When the original is the size of the desired output, use the Reduce/Enlarge feature to reduce the image so the copy is not cropped.

ENWW

Copy settings 115

Page 129
Image 129
HP 100 COLOR CE866ABGJ, 100 COLOR MFP M175 manual Adjust the lightness or darkness for copies, Define custom copy settings