HP 100 COLOR CE866ABGJ, 100 CE866ARBGJ Product updates, Clean the paper path, Clean the exterior

Models: 100 CE866ARBGJ

1 220
Download 220 pages 58.76 Kb
Page 150
Image 150
Clean the paper path

Clean the paper path

During the printing process, paper, toner, and dust particles can accumulate inside the product. Over time, this buildup can cause print-quality problems such as toner specks or smearing. This product has a cleaning mode that can correct and prevent these types of problems.

Specks

Smearing

 

 

 

 

 

 

Clean the paper path from the product control panel

1.Press the Setup Clean the paper path from the product control panel button.

2.Use the arrow buttons to select the Service menu, and then press the OK button.

3.Use the arrow buttons to select the Cleaning Page item, and then press the OK button.

4.Load plain letter or A4 paper when you are prompted.

5.Press the OK button again to confirm and begin the cleaning process.

A page feeds through the product slowly. Discard the page when the process is completed.

Clean the exterior

Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains off of the exterior of the device.

Product updates

Software and firmware updates and installation instructions for this product are available at www.hp.com/support/LJColorMFPM175. Click Downloads and drivers, click the operating system, and then select the download for the product.

136 Chapter 12 Manage and maintain the product

ENWW

Page 150
Image 150
HP 100 COLOR CE866ABGJ, 100 COLOR MFP M175, 100 CE866ARBGJ manual Product updates, Clean the paper path, Clean the exterior