HP 100 COLOR MFP M175 manual Remove software from Mac operating systems, Select HP Uninstaller

Models: 100 CE866ARBGJ

1 220
Download 220 pages 58.76 Kb
Page 40
Image 40
Connect the product to a wireless network using WPS

Connect the product to a wireless network using WPS

If your wireless router supports Wi-Fi Protected Setup (WPS), this is the simplest way to set up the product on a wireless network.

1.Press the WPS button on your wireless router.

2.Press and hold the Wireless Connect the product to a wireless network using a USB cableRemove software from Mac operating systems2.Open Applications. button on the product control panel for two seconds. Release the button when the wireless light starts blinking.

3.Wait up to two minutes while the product establishes a network connection with the wireless router.

4.Select HP Uninstaller. NOTE: If this method is not successful, try using the wireless network using USB cable method.

Connect the product to a wireless network using a USB cable

If your wireless router does not support WiFi-Protected Setup (WPS), use this method to set up the product on a wireless network. Using a USB cable to transfer settings makes setting up a wireless connection easier. After the setup is complete, you can disconnect the USB cable and use the wireless connection.

1.Insert the software CD into the computer CD tray.

2.Follow the on-screen instructions. When prompted, select the Connect through a wireless network option. Connect the USB cable to the product when prompted.

Priority for print settings for Mac CAUTION: Do not connect the USB cable until the installation program prompts you.

3.When the installation is complete, print a configuration page to make sure that the product has a SSID name.

4.When installation is complete, disconnect the USB cable.

Remove software from Mac operating systems

You must have administrator rights to remove the software.

1.Disconnect the product from the computer.

2.Open Applications.

3.Select Hewlett Packard.

4.Select HP Uninstaller.

5.Select the product from the list of devices, and then click the Uninstall button.

6.After the software is uninstalled, restart the computer and empty the Trash.

Priority for print settings for Mac

Changes to print settings are prioritized depending on where the changes are made:

26 Chapter 4 Use the product with Mac

ENWW

Page 40
Image 40
HP 100 COLOR MFP M175, 100 COLOR CE866ABGJ Remove software from Mac operating systems, Priority for print settings for Mac