HP 100 COLOR MFP M175 manual Control panel message, Description, Recommended action, Door open

Control panel message	Description	Recommended action
Door open	The print cartridge door is open.	Close the print cartridge door.

Jam in cartridge area	The product has detected a paper jam in the
	print cartridge area.

Clear the jam from the area indicated in the message, and then follow the control panel instructions.

Magenta cartridge is low	The print cartridge is nearing the estimated	Printing can continue, but consider having a
	end of its useful life.	replacement supply on hand.
Magenta cartridge is very low	The print cartridge is at the estimated end of	To ensure optimal print quality, HP
	its useful life.	recommends replacing the print cartridge at
		this point. You can continue printing until
		you notice a decrease in print quality. Actual
		cartridge life may vary.
		Once an HP supply has reached “very low”,
		HP's premium Protection Warranty on that
		supply has ended. All print defects or
		cartridge failures incurred when an HP
		supply is used in continue at very low mode
		will not be considered to be defects in
		materials or workmanship in the supply
		under the HP Print Cartridge Warranty
		Statement.
Replace <Color> Cartridge	The indicated print cartridge is at the	Replace the print cartridge, or reconfigure
	estimated end of its useful life. The product	the product to continue printing after the
	is customer-configured to stop when the	print cartridge reaches the “very low” level.
	print cartridge level is very low.
Replace <Color>. Printing Black.	The indicated print cartridge is at the	To ensure optimal print quality, HP
	estimated end of its useful life. The product	recommends replacing the print cartridge at
	is customer-configured to print with the	this point. You can continue printing until
	black cartridge only, until the very low print	you notice a decrease in print quality. Actual
	cartridge is replaced.	cartridge life may vary.
		Once an HP supply has reached “very low”,
		HP's premium Protection Warranty on that
		supply has ended. All print defects or
		cartridge failures incurred when an HP
		supply is used in continue at very low mode
		will not be considered to be defects in
		materials or workmanship in the supply
		under the HP Print Cartridge Warranty
		Statement.
Replace Supplies	Multiple supplies are at the estimated end of	Replace the supplies, or reconfigure the
	their useful life, and the product is	product to continue printing after the
	customer-configured to stop when the	supplies reach the “very low” level.
	supply level is very low.

74 Chapter 7 Print cartridges and imaging drum ENWW