3.Lift the accessory battery from the bottom of the computer (2).
Battery charging and discharging sequence
Battery charging and discharging sequence varies when both the primary battery and optional accessory battery are installed.
●The computer supports Fast Charge Mode (enabled at the factory). When both batteries are charging, the primary battery will charge to 90 percent before the accessory battery begins charging. Charging is then switched to the accessory battery. When the accessory battery reaches 90 percent, the primary battery will then charge to 100 percent. After the primary battery is completely charged, the accessory battery will charge to 100 percent.
NOTE: Fast Charge Mode can be disabled in Setup Utility (BIOS). If Fast Charge Mode is disabled, the primary battery will charge to 100 percent before the accessory battery begins charging. Refer to Setup Utility (BIOS) on page 84 for additional information.
●When the accessory battery reaches a critical battery level, battery power is transferred to the primary battery.
●The accessory battery will discharge before the primary battery discharges.
●When the accessory battery is removed from the computer, battery power is transferred to the primary battery.
●When the accessory battery is inserted in the computer, battery power is transferred to the accessory battery.
Calibrating a battery
To maximize battery performance, you should calibrate a battery under the following conditions:
●When battery charge displays seem inaccurate
●When you observe a significant change in battery run time
56 Chapter 6 Power management