Operating Instructions & Parts Manual | 020598 and 020599 |
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
Description
These centrifugal pumps include a precision mechanical seal with stainless steel spring, EPDM seals, carbon face and ceramic seat, and a
Applications include pumping clear, clean water, salt water, and some liquid fertilizers and herbicides. An optional Buna N
Specifications
Suction inlet . . . . . . . . . . . . . . . . . . 2" † Discharge outlet . . . . . . . . . . . . . . . 2" †
(†) Standard NPT (female) pipe thread.
Dimensions (overall)
020598 . . . . . . . . 13" H x 15" W x 18" L 020599 . . . . . . . . . 183⁄8L x 173⁄8W x 151⁄4H
Engine
020598 . . . . . . . . . . . . . . . . . 3.5 HP B&S
020599 . . . . . . . . 5.5 HP B&S OHV Intek
Oil type . . . . . . . . . SAE 30W Detergent
Weight |
|
020598 . . . . . . . . . . . . . . . . . . . . | 38 lbs. |
020599 . . . . . . . . . . . . . . . . . . . . | 43 lbs. |
Material . . . .
Safety Guidelines
Failure to follow any warnings/ cautions
can result in personal injury, pump dam- age, and/or property damage.
This manual contains information that is very important to know and under-
stand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols:
Danger indicates an imminently haz-
ardous situation which, if not avoided, WILL result in death or serious injury.
Warning indicates a potentially haz-
ardous situation which, if not avoided, COULD result in death or serious injury.
Caution indicates a potentially haz-
ardous situation which, if not avoided, MAY result in minor or moderate injury.
NOTE: Indicates important information that, if not followed, may cause damage to equipment.
Unpacking
After unpacking the unit, inspect carefully for any damage that may have occurred during transit. Make sure to tighten fittings, bolts, etc., before putting unit into service.
7/2003 |