% !!Attempted to refer to a nonexistent program label (or line number) with U,UŒ, W, or {}. Note that the error % !! can mean

you explicitly (from the keyboard) called a program label that does not exist; or

the program that you called referred to another label, which does not exist.

   The catalog of programs ( zX{} ) indicates no program labels stored.

 ! SOLVE cannot find the root of the equation using the current initial guesses (see page C–8). A SOLVE operation executed in a program does not produce this error; the same condition causes it instead to skip the next program line (the line following the instruction # variable).

#$

Warning (displayed momentarily); the magnitude of

 

a result is too large for the calculator to handle. The

 

calculator returns ±9.99999999999E499 in the

 

current display format. (See "Range of Numbers and

 

Overflow" on page 1–12.) This condition sets flag 6.

 

If flag 5 is set, overflow has the added effect of

 

halting a running program and leaving the message

 

in the display until you press a key.

 !

Indicates the "top" of program memory. The memory

 

scheme is circular, so  ! is also the "line"

 

after the last line in program memory.

"

! 

The calculator is running a program (other than a SOLVE or FN routine).

Attempted to execute # variable or  d variable without a selected program label. This can happen only the first time that you use SOLVE or FN after the message & , or it can happen if the current label no longer exists.

# !#A running program attempted to select a program label (/label) while a SOLVE operation was running.

#1 #2A running program attempted to solve a program while a SOLVE operation was running.

#12A running program attempted to integrate a program

Messages E–3

File name 32sii-Manual-E-0424

 

Printed Date : 2003/4/24

Size : 17.7 x 25.2 cm