Configuring BGP4
23.Select the checkbox in the Dampening section to specify that this route map is setting dampening parameters.
24.Edit the value in the Half Life field to specify the half life you want this route map to set for routes that match the match conditions you specified above.
25.Edit the value in the Reuse field to specify the dampening reuse value you want this route map to set.
26.Edit the value in the Suppress field to specify the dampening suppress value you want this route map to set.
27.Edit the value in the Max Suppress Time field to specify the maximum suppression value you want this route map to set.
28.Click Apply to apply the changes to the device’s
29.In the tree view, under BGP in the Configure section, click on the General link to display the BGP configuration panel.
30.In the Dampening section, click next to
NOTE: The route map appears in this menu only if you have already configured the route map.
31.Click Apply to apply the changes to the device’s
32.Select the Save link at the bottom of the dialog. Select Yes when prompted to save the configuration change to the
10 - 75