Advanced Configuration and Management Guide
5.Enter the VLAN ID that will contain the protocol VLAN in the VLAN ID field.
6.Enter a name for the VLAN in the Protocol_VLAN_Name field.
7.Select the virtual interface from the Router_Interface pulldown list if you configured a virtual interface for routing into and out of the VLAN.
8.Select the protocol type.
9.Specify the port that are members for the VLAN:
•Select Dynamic Port if you want the port membership to be dynamic. For information, see “Dynamic Ports” on page
•Click the Change Static Members button if you want to configure static ports. For information, see “Static Ports” on page
•Click the Change Exclude Members button if you want to explicitly exclude some ports. For information, see “Excluded Ports” on page
NOTE: All the ports must be members of the
10.Click the Add button (if you are adding a new VLAN) or the Modify button (if you are modifying an existing VLAN) to save the change to the device’s
11.Select the Save link at the bottom of the dialog. Select Yes when prompted to save the configuration change to the
NOTE: You also can access the dialog for saving configuration changes by clicking on Command in the tree view, then clicking on Save to Flash.
16 - 52