Customizing the monitor display

You can customize display settings for Windows 8 separately for the Start screen and the Desktop. To customize the Start screen:

1.Point to the upper-right or lower-right corner of the Start screen to display the charms.

2.Click Settings > Change PC Settings.

3.Click Personalize to change the display settings.

To customize the Desktop:

1.Click the Desktop app on the Start screen.

2.Right-click on the desktop, and then click Personalize to change display settings.

Turning off the computer

To properly turn off the computer, shut down the operating system software.

1.Point to the upper-right or lower-right corner of the Start screen to display the charms, and then click Settings.

2.Click the Power icon, and then click Shut down.

Finding more information

NOTE: Some or all of the following documents are available on the computer hard drive.

●Getting Started—Helps you connect the computer and peripheral devices and set up factory- provided software; also includes basic troubleshooting information should you encounter any problems during initial startup.

●Hardware Reference Guide—Provides an overview of the product hardware, as well as instructions for upgrading this series of computers; includes information on RTC batteries, memory, and power supply.

●Maintenance and Service Guide (English only)—Provides information on parts removal and replacement, troubleshooting, Desktop Management, setup utilities, safety, routine care, connector pin assignments, POST error messages, diagnostic indicator lights and error codes.

●Regulatory, Safety and Environmental Notices—Provides safety and regulatory information that ensures compliance with U.S., Canadian, and various international regulations.

Accessing User Guides (Linux systems)

Double-click the HP User Manuals icon on your desktop. Select the folder for your language. Select the guide you wish to access.

If you encounter issues

There are several means to diagnose and resolve potential issues. HP provides several proprietary diagnostics tools but recommends a sequential troubleshooting approach that addresses the most basic root cause to the more complex. Steps include:

●Visual inspection

●Blink or beep codes

Turning off the computer 15