Command Line Interface Reference Guide | copy |
| |
Copy data to specified configuration file.
Next Available Options:
■unix -- Change CR/LF to unix style.(p. 131)
■pc -- Change CR/LF to PC style.(p. 120)
■copy config < config1 config2 config3 >
Copy named configuration file.
Supported Values:
■config1
■config2
■config3
Next Available Options:
■config -- Copy data to specified configuration file. (ASCII-STR) (p. 106)
■tftp -- Copy data to a TFTP server.(p. 124)
■xmodem -- Use xmodem on the terminal as the data destination.(p. 135)
■copy config < config1 config2 config3 > config CONFIG
Copy data to specified configuration file.
crash-data
■copy crash-data
Copy the switch crash data file.
Next Available Options:
■card -- Enter single slot identifier. (SLOT-ID-RANGE) (p. 105)
■mm -- Copy from the management card.(p. 119)
■tftp -- Copy data to a TFTP server.(p. 124)
■xmodem -- Use xmodem on the terminal as the data destination.(p. 135)
■usb -- Copy data to a USB flash drive.(p. 133)
crash-log
■copy crash-log
Copy the switch log file.
Next Available Options:
■card -- Enter single slot identifier. (SLOT-ID-RANGE) (p. 105)
■mm -- Copy from the management card.(p. 119)
■tftp -- Copy data to a TFTP server.(p. 124)
■xmodem -- Use xmodem on the terminal as the data destination.(p. 135)
■usb -- Copy data to a USB flash drive.(p. 133)
cv_flash
■ copy tftp flash IP-ADDR FILENAME < primary secondary >
