Command Line Interface Reference Guideaaa

o <backup-method> - Specifies an authentication method

to use, if the primary authentication method is not able to check user's credentials.

Use <TAB> or <?> after you specify the primary authentication method to get a list of all available backup methods.

Next Available Options:

■enable -- Configure access to the privileged mode commands.(p. 33)

■login -- Configure login access to the switch.(p. 36)

tx-period

■aaa port-access authenticator [ETHERNET] PORT-LISTtx-period < 1 to 65535 >

Set the period of time the switch waits until retransmission of EAPOL PDU (default 30 sec.).

Range: < 1 to 65535 >

unauth-period

■aaa port-access authenticator [ETHERNET] PORT-LISTunauth-period < 0 to 255 >

Set period of time the switch waits for authentication before moving the port to the VLAN for unauthenticated clients.

Range: < 0 to 255 >

unauth-vid

■[no] aaa port-access authenticator [ETHERNET] PORT-LISTunauth-vid

Configures VLAN where to keep port while there is an unauthenticated client connected (not configured by default).

Next Available Option:

■VLAN-ID-- Configures VLAN where to keep port while there is an unauthenticated client connected (not configured by default). (VLAN-ID) (p. 54)

■[no] aaa port-access mac-based [ETHERNET] PORT-LISTunauth-vid

Configures VLAN where to keep port while there is an unauthorized client connected (not configured by default).

Next Available Option:

■VLAN-ID-- Configures VLAN where to keep port while there is an unauthorized client connected (not configured by default). (VLAN-ID) (p. 54)

■[no] aaa port-access web-based [ETHERNET] PORT-LISTunauth-vid

Configures VLAN where to keep port while there is an unauthorized client connected (not configured by default).

© 2009 Hewlett-Packard Development Company, L.P.

53