Regulatory Compliance Notices
Laser Safety
A. Certification and Classification Information
When equipped with native Fibre Channel adapters, this product contains a laser internal to the small form factor pluggable (SFP) transceiver modules.
In the USA, the SFP module is certified as a Class 1 Laser product, conforming to the requirements contained in Department Of Health and Human Services (DHHS) regulation 21 CFR, Subchapter J. The certification is indicated by a label on the metal SFP housing.
Outside the USA, the SFP is certified as a Class 1 Laser product conforming to requirements contained in IEC
The SFP includes the following certifications:
■UL Recognized Component (USA)
■CSA Certified Component (Canada)
■TUV Certified Component (European Union)
■CB Certificate (Worldwide)
The following figure shows the Class 1 information label that appears on the metal housing of the SFP.
CLASS 1 LASER PRODUCT 21 CFR(J)
B. Product Information
Each communications port consists of a transmitter and receiver optical subassembly. The transmitter subassembly contains internally a semiconductor laser diode in the wavelength of either 850 nanometers (shortwave laser) or 1310 nanometers (longwave laser).
Class 1 Laser products are not considered hazardous.
C. Usage Restrictions
Failure to comply with these usage restrictions may result in incorrect operation of the system and points of access may emit laser radiation above the Class 1 limits established by the IEC and U.S. DHHS.
80 | hp StorageWorks SAN Switch 2/8 Installation Guide |
