QuickSpecs
HP ap5000
Technical Specifications
Weight | 0.18 lb (80 g) |
|
Bandwidth Performance | Sustained Sequential | Up to 250 MB/s |
| Read |
|
| Sustained Sequential | Up to 70 MB/s |
| Write |
|
| Random Read (4KB) | up to 35K IOPs |
| Random Write (4KB) | up to 6.6K IOPs |
Latency | Read | 65 ms |
| Write | 85 ms |
Power | Total power | 0.15 Watt (Active); |
| consumption | 0.075 Watt (Idle) |
Useful drive life | 5 years | 35TB written, up to |
|
| 20GB/day for 5 years |
Environmental | Temperature | 32° to 158° F (0° to 70° |
(all conditions, non- | (operating) | C) |
condensing) | Relative Humidity | 5% to 95% |
| ||
| (operating) |
|
| Maximum Wet Bulb | 84° F (29° C) |
| Temperature |
|
| (operating) |
|
| Shock (operating) | 1,500 G/0.5 msec |
Regulations | UL, CSA, EN | |
| B, CNS 13438, AS/NZS CISPR 22:2002 Class | |
| B, R1113 and C1172 Class B | |
*For solid state disk drives, GB means 1 billion bytes. 80GB is the unformatted capacity of this drive before a portion of the drive is reserved for flash management features. Actual capacity will vary by content
Unformatted Capacity | 64 GB |
| |
| NAND Flash Memory | Multi Level Cell (MLC) with wear leveling | |
|
| controller |
|
| Interface type | SATA 3Gb/sec |
|
| 2.74 x 0.37 x 4 in (6.98 x 0.95 x 10.2 cm) | ||
| (W x H x D) |
|
|
| Weight | 0.14 lb (65 g) |
|
| Internal transfer rate | Write speed | Up to 220 MB/s |
|
| Read speed | Up to 120 MB/s |
| Host transfer rate | Ultra DMA mode | Up to 150 MB/s |
| Environmental | Temperature | 32° to 158° F (0° to 70° |
| (all conditions, non- | (operating) | C) |
| condensing) | Relative Humidity | 5% to 95% |
|
| ||
|
| (operating) |
|
|
| Maximum Wet Bulb | 84° F (29° C) |
|
| Temperature |
|
|
| (operating) |
|
DA - 13540 Worldwide — Version 13 — January 30, 2012 | Page 10 |