Service Tests and Utilities

„Getting Plotter info.

39The Front Panel then displays the Plotter Information results and prompts you to press any key to finish.

40Press any key to finish.

41The Front Panel shows the test complete display for a few seconds.

42The Front Panel prompts you to shutdown the printer to complete the test.

43Press any key to shutdown the printer.

4.Carriage Assembly

The Carriage assembly test diagnoses Failures of any components of the Carriage. Always run this test before replacing the Carriage Assembly.

Diagnostic tests also need to be performed after removing or replacing certain printer components. If you have removed or replaced printer components, check the Service Calibration Guide to Removal and Installation on page 6-5 to see which tests and calibrations you need to perform. Service Calibration Guide to Removal and Installation on page 6- 5.

1In the Diagnostics menu, scroll to 4. Carriage Assembly and press OK.

2The Power supply test starts and the Front Panel displays the following messages:

3-26

HP Designjet T Series — Service Manual