Service Tests (Diagnostics)
6Press OK to continue.
7The test continues and the front Panel displays the following messages:
Starting Horsburgh0.
Starting Mips.
Starting Nvm.
Getting Part Number.
Starting ISS Motors.
Moving Bongos down.
Reading Bongos down.
Moving Bongos up.
Reading Bongos up.
Starting OutOfInk sensors.
Reading OutOfInk.
8The Front Panel then prompts you push down Bongo0.
9Press and hold down Bongo0 which is located at the furthest left Ink Cartridge position.
10Press any key.
11Release Bongo0.
12Press any key.
13The Front Panel then displays the Bongo0 test results.
14Press any key to continue.
15Repeat steps 8 through 14 for the remaining Out of Ink sensors for each of the Ink Cartridges.
16The front Panel prompts you to insert all the Ink Supplies.
HP Designjet T Series — Service Manual |