Service Tests (Diagnostics)
2The Front Panel will show the 8. Service Station submenu.
3In the 8. Service Station submenu, scroll to Primer Motor and press OK to start the test.
4The Primer Motor test starts and the front Panel displays the following messages:
Starting Horsburgh and Mips.
Starting Nvm.
Getting Part Number.
Starting Service Station.
Starting Scan Axis.
Moving SVS out of Sax.
Homing Scan Axis.
Moving Carriage out of SVS.
Homing Service Station.
Starting ServicingServices.
Capping Service Station.
Uncapping Service Station.
Starting Primer Motor
Starting AcumenSupplies
Starting FluidManager
Starting Primer
Preparing SVS
Reading Homing Sensor
Zero Sensor initial value: 0.
Step 1: current zeroSensor value: 0.
OK: It has been detected a change in zero sensor.
Homing Primer Motor
Moving Primer Motor and getting traces
Moving Primer Motor to home position
Capping service station
5The Front Panel shows the test complete display for a few seconds.
HP Designjet T Series — Service Manual |