Service Calibrations
and press OK.
2In the Drop Detector Calibration menu, scroll to Reset Calibration Flag and press OK.
3When the following message appears on the front panel, you must select whether you would like to continue with the calibration by pressing the OK key. Press Back or Cancel to exit the calibration.
4The printer will start to reset the calibration flag.
5Once the calibration is completed, the Front Panel will return to the menu.
6Restart the printer, and the printer will automatically calibrate the drop detector.
Calibrate Drop Detector
Perform the Drop Detector Calibration as follows:
1In the Service Calibrations submenu, scroll to Drop Detector Calibration
HP Designjet T Series — Service Manual |