Removal and Installation - Right Cover

Right Cover

Removal

Switch off the printer and remove the power cable.

1. Remove the Front Cover on page 6-16.

2. Open the Right Ink Cartridge Door by applying sharp pressure to the right side of the door and lifting firmly where the door meets the Right Cover. Use your hands. When the door is unclipped from the pressure applied to the right side of the door, you will hear a sound that corresponds to the clip.

Do NOT use a screwdriver or other tool to open the Right Ink Cartridge Door.

3. Remove one T-15 screw that secures the Right Cover to the printer (at the rear of the Printer).

4. Remove one T-15 screw that secures the Right Cover to the printer (at the rear of the Printer).

HP Designjet T Series — Service Manual

6-27