Removal and Installation - Ink Supply Tubes Support Rail (T1120/T1120ps)

Ink Supply Tubes Support Rail (T1120/T1120ps)

Removal

Switch off the printer and remove the power cable.

1. Remove the Right Cover on page 6-27.2. Remove the Left Cover on page 6-30.3. Remove the Front Panel on page 6-47.4. Remove the Top Cover on page 6-50.

5. Remove the Window Position Sensor on page 6-53.

6. Remove two T-15 screws that secure the Ink Supply Tubes Support Rail to the right Top Cover Support.

7. Carefully slide the Ink Supply Tubes Support Rail to the left until the right end is clear of the right Top Cover Support.

HP Designjet T Series — Service Manual

6-59