Removal and Installation

Carriage Assembly (T1100/T1100ps/T610)

Removal

Switch off the printer and remove the power cable.

If you replace the Carriage Assembly with service parts Q6683-60231

(24 inch) or Q6687-60087 (44 inch) that include a Trailing Cable, remember to remove the Trailing Cable with the Carriage Assembly.

1. Remove the Front Cover on page 6-16.

2. Remove the Right Cover on page 6-27.

3. Remove the Left Cover on page 6-30.

4. Remove the Cutter Assembly on page 6-

42.

5. Remove the Front Panel on page 6-47.

6. Remove the Top Cover on page 6-50.

7. Remove the Window Position Sensor on page 6-53.

8. Remove the Ink Supply Tubes Support Rail (T1100/T1100ps/T610) on page 6-55.

9. Manually uncap the Service Station.

10. Remove the Encoder Strip, spring and attachment nut (T1120/T1120ps) on page 6-99.

11. If necessary manually move the Carriage Assembly fully right into the docking station.

12. Use a short torx screwdriver to remove the

two T-10 screws that secure the center attachment of the Trailing Cables.

6-116

HP Designjet T Series — Service Manual