Ink Supplies Troubleshooting
Error | Status | Status | Description | Comments |
Code | Name | Message |
|
|
|
|
|
|
|
16384 | CSdata | Reseat | CSdata | Could be caused |
| Transmit |
| commuication | by bad contact |
| Error |
| incorrect |
|
|
|
|
|
|
32768 | Fails Energy | Reseat | Energy calibration | Could be caused |
| Calibration |
| failed | by bad contact |
|
|
|
|
|
65536 | Empty | OK during |
| Requested during |
| Dummy | Purge |
| purge, otherwise |
|
|
|
| should be |
|
|
|
| removed |
|
|
|
|
|
131072 | Full Dummy | Remove |
| Requested during |
|
|
|
| purge |
|
|
|
|
|
262144 | End of Life | Warning | Printhead |
|
|
|
| warranty expired |
|
|
|
|
|
|
524288 | Expired | Warning | Printhead has |
|
|
|
| used expired or |
|
|
|
|
| |
|
|
|
|
|
Solving Ink Supplies Problems
Most of the problems that you could encounter when working with the ink supplies are solved with guidance from the front panel. A full list of front panel messages are supplied in the User’s Guide.
You Cannot Insert the Ink Cartridge Into the Printer
1Ensure that you have the correct hp no.72 Ink Cartridge.
2Ensure that the Ink Cartridge is the correct color for that slot.
3Ensure that the Ink Cartridge is the correct orientation, with the color coded label at the top.
Never clean inside the Ink Cartridge slots as this can cause damage to the Printer.
You Cannot Insert the Printhead Into the Printer
1Ensure that you have the correct hp no.72 Printhead.
2Ensure that the printhead is the correct color for that slot.
3Ensure that the printhead is in the correct orientation.
4Ensure that the protective cap is removed from the Printhead.
The front panel says to reset or replace a printhead
1From the front panel, turn the power off then on.
2Check the front panel display message, if it shows the ready message, the printer is ready to print. If the problem remains continue with the next step.
3Remove the printhead.
HP Designjet T Series — Service Manual |