Removing a RAM Board

(User-Replaceable)

Table 2-4. RAM Board Replacement Part Numbers

Description

Part Number

Exchange

 

 

Part Number

 

 

RAM board, 32-MB

1818-7413

F1456-69001

RAM board, 64-MB

1818-7414

F1457-69001

Caution

Handle the RAM board only by its edges and provide proper grounding. Otherwise, you may damage the board due to electrostatic discharge.

Required Equipment

∙None.

Removal Procedure

1.Unplug the ac adapter, if present, and remove the battery.

2.Turn the unit bottom side up and unsnap the RAM cover.

3.Release the two metal latches at the sides of the RAM board, so the free edge of the board pops up.

4.Pull the board out of the connector.

Figure 2-2. Removing a RAM Board

Reassembly Notes

∙Insert the RAM board into the connector at about a 30° angle until it is fully inserted. Then press down at both sides until both latches snap closed.

∙If only one RAM board is present, you can install it in either connector.

2-4

Removal and Replacement

HP OmniBook 7100