IC Insertion/Removal Tool

Figure 2-12. Removing the BIOS IC

Reassembly Notes

Caution

Align the IC with the slot in the socket. The IC is keyed to fit correctly. If you insert the IC backward, the IC or motherboard could be damaged.

∙Press down firmly on the IC with your thumb to ensure a proper connection.

∙Reprogram the IC by programming the BIOS—see the note above.

Removing Other Components

(HP Authorized Service Providers Only)

Required Equipment

∙Small Phillips screwdriver.

∙5 mm hex driver (for motherboard-related components).

∙Probe or tweezers.

Removal Procedure

1.Unplug the ac adapter, if present, and remove the battery.

2.Remove the additional assemblies and follow the special steps indicated in the tables below. Components are separated into these groups:

∙Display components (below).

∙Top case components (page 2-22).

∙Bottom case components (page 2-23).

2-20 Removal and Replacement

HP OmniBook 7100