High Voltage Power Supply (HVPS) Removal

Figure 6-19 HVPS Screws (2) and Latches (2) (Bottom View)

1 Remove the Toner Cartridge and PC tray.

2 Lay the printer on its left side. (Place a cloth under the printer to prevent marking the cover.)

3 Remove the (2) screws that hold the HVPS in place (see Figure 6-19, callout 1).

4 Release the (2) latches that hold the High Voltage Power Supply (see Figure 6-19, callout 2).

5 Pull the HVPS straight away from the printer to clear its locator pins and to prevent damage to the HVPS connectors.

6 Remove the HVPS from its housing by releasing the (4) retaining clips that hold the PCA in place.

N o t e

Run a printing self-test after replacing the high

 

voltage power supply. If the printer prints solid

 

black pages, the HVPS may be seated incorrectly.

 

Repeat the installation procedure, being careful to

 

align the high voltage connectors.

Removal and Replacement 6-21