Chapter 4

setup Finish

To set the product to require passkey authentication

1.Press Setup.

2.Press the down arrow button until Bluetooth is highlighted, and then press OK.

3.Press the down arrow button until Passkey is highlighted, and then press OK.

4.Use the visual keyboard to enter a new passkey.

NOTE: The passkey must be 1 to 4 characters long, and can only consist of numbers.

5.When you have finished entering your passkey, press OK to view the Bluetooth menu.

6.Press the down arrow button until Security Level is highlighted, and then press OK.

7.Press OK to select High.

High level security requires authentication. Passkey authentication is now set for the product.

Related topics

“Enter text using the visual keyboard” on page 14

Set the HP All-in-One to be invisible to Bluetooth devices

You can set the HP All-in-One to be either Visible to all Bluetooth devices (public) or Not visible to any (private).

•Visible to all: This is the default accessibility level. Any Bluetooth device within range can print to the HP All-in-One.

•Not visible: Only Bluetooth devices that have stored the device address of the HP All- in-One can print to it.

To set the product to be Not visible

1.Press Setup.

2.Press the down arrow button until Bluetooth is highlighted, and then press OK.

3.Press the down arrow button until Visibility is highlighted, and then press OK.

4.Press the down arrow button to select Not visible, and then press OK.

The product is inaccessible to Bluetooth devices that have not stored its device address.

Reset Bluetooth settings on the HP All-in-One

You can reset all of the Bluetooth settings on the HP All-in-One to the factory defaults.

28 Finish setting up the HP All-in-One