Computer Setup

Computer Setup Utilities (F10)

Use Computer Setup to do the following:

■Change factory default settings.

■Set the system date and time.

■Set, view, change, or verify the system configuration, including settings for processor, graphics, memory, audio, storage, communications, and input devices.

■Modify the boot order of bootable devices such as hard drives, diskette drives, CD-ROM drives, DVD-ROM drives, or LS-120 drives.

■Configure the boot priority of IDE and SCSI hard drives controllers.

■Configure Quiet Drive options (for drives that support this feature).

■Enable Quick Boot, which is faster than Full Boot but does not run all of the diagnostic tests run during a Full Boot. You can set your system to:

❏always Quick Boot (default);

❏periodically Full Boot (from every 1 to 30 days); or

❏always Full Boot.

■Enable or disable Network Server Mode, which allows the computer to boot the operating system when the power-on password is enabled, with or without a keyboard or mouse attached. When attached to the system, the keyboard and mouse remain locked until the power-on password is entered.

Computer Setup Guide

1