Computer Setup (F10) Utility Guide

Computer Setup (Continued)

Heading

Option

Description

 

 

 

Storage

SCSI Narrow

Allows you to configure SCSI termination on

(continued)

Termination

the external SCSI connector for narrow SCSI

 

(This feature is

drives. This feature should only be enabled

 

if you are using a narrow SCSI drive to

 

supported on select

 

terminate the external SCSI channel.

 

models only.)

 

 

 

 

 

 

Boot Order

Allows you to specify the order in which

 

 

attached peripheral devices (such as a

 

 

diskette drive, hard drive, optical drive, or

 

 

network interface card) are checked for a

 

 

bootable operating system image. Each

 

 

device on the list may be individually

 

 

excluded from or included for consideration

 

 

as a bootable operating system source.

 

 

✎ MS-DOS drive lettering assignments

 

 

may not apply after a non-MS-DOS

 

 

operating system has started.

 

 

To boot one time from a device other than

 

 

the default device specified in Boot Order,

 

 

restart the computer and press F9 when the

 

 

F10 = Setup message appears on the

 

 

screen. When POST is completed, a list of

 

 

bootable devices is displayed. Use the

 

 

arrow keys to select a device and press the

 

 

Enter key.

Support for Computer Setup options may vary depending on your specific hardware configuration.

10

Computer Setup (F10) Utility Guide